產品展示首頁 > 產品中心 > 涂料檢測設備 > 濕膜梳/濕膜輪 > 超聲波探傷儀探頭【奧林巴斯Olympus】

超聲波探傷儀探頭【奧林巴斯Olympus】

型號：
報價：

分享到：

產品描述

超聲波探傷儀探頭【奧林巴斯Olympus】

AWS楔塊與探頭

超聲波探傷儀探頭【奧林巴斯Olympus】

AWS探頭和楔塊

AWS探頭和楔塊符合美國焊接協會的結構焊接規范對用于焊縫檢測中的角度聲束組合件提出的特殊要求。

AWS Transducers

Nominal Element Size	Freq.		Transducer Part Num*	Snail Wedge Part Num*	Accupath Wedge Part Num*
inches	MHz	ACCUSCAN	CENTRASCAN
0.625 x 0.625	2.25	A430S-SB	C430-SB	ABWS-8 -X°	ABWS-6-X°
0.625 x 0.75	2.25	A431S-SB	C431-SB	ABWS-8 -X°	ABWS-6-X°
0.75 x 0.75	2.25	A432S-SB	C432-SB	ABWS-8 -X°	ABWS-6-X°

* Wedges are available in standard refracted shear wave angles of 45°, 60° and 70° in steel. Please specify upon ordering.

Snail Wedges

Snail Wedge Dimensions* （in inches）
	（A）	（B）	（C）	（D）
45°	2.15	0.62	1.78	1.25
60°	1.91	0.65	1.81	1.25
70°	2.17	0.67	1.92	1.25

*Distance between screws （center to center） is 1.00".

Accupath Wedges

Accupath Wedge Dimensions* （in inches）
	（A）	（B）	（C）	（D）
45°	1.50	0.90	1.96	1.50
60°	1.68	0.79	2.05	1.50
70°	1.66	0.96	2.20	1.50

*Distance between screws （center to center） is 1.062".

雙晶探頭

Dual Element Transducers

Two angled elements create a V-shaped sound path in the test material. This "Pseudo-Focus" enhances resolution in the focal zone. A dual element transducer consists of two crystal elements housed in the same case, separated by an acoustic barrier. One element transmits lon gitudinal waves, and the other element acts as a receiver.

概覽
齊頭外殼雙晶
指尖雙晶
擴展范圍雙晶
袖珍*雙晶

Miniature Tip Dual

Provides better coupling on curved surfaces
Low profile allows for better access in areas of limited space
Maximum temperature capability 122°F （50°C）

Freq.	Tip Diameter		Nominal Element Size		Transducer Part Number
MHz	inches	mm	inches	mm
5.0	0.20	5	0.15	3.8	MTD705

Miniature Tip Dual Cables

Replaceable cable for all flaw detectors

Cable Part Number	Fits Connector Style
BCLPD-78-5	Dual BNC to Lepra/Con
L1CLPD-78-5	Dual Large Lemo 1 to Lepra/Con
LCLPD-78-5	Dual Small Lemo 00 to Lepra/Con

Extended Range Duals

Shallow roof angles provide greater sensitivity to deep flaws, back walls, and other reflectors, 0.75" （19 mm） and beyond in steel
Can be used for high temperature measurements when delay lines are unacceptable
High-strength flexible 6' （1.8 m） potted cable with BNC connectors

Fingertip and Extended Range Dual